View Cart → "DRIVE RECORDER 16GB SDHC CARD" was successfully added to your cart.
thumb_rh-hard-wiring-kit

DC-1 HARD WIRING KIT

£19.94

This is the hard wiring kit for the DC-1 in car camera system.

It has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera.

Inside the filter box are componants which will cut the power to the camera should the vehicle’s voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanant 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.

This kit has two wires.

Black = Negative (earth)
Red = Postive (12v)

Compatible with DC-1 and RH-1 and RoadHawk HD cameras only.
Not compatible with RH-2 or RH-2 Pro

SKU: DC-MXQCA3. Category: .

Product Description

This is the hard wiring kit for the DC-1 in car camera system.

It has a total of 5m of cable with an inline fuse. There is a filter box inline which reduces interference to and from the camera.

Inside the filter box are componants which will cut the power to the camera should the vehicle’s voltage drop reducing the risk of flattening the battery. You can connect this kit up to a permanant 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running.

This kit has two wires.

Black = Negative (earth)
Red = Postive (12v)

Compatible with DC-1 and RH-1 and RoadHawk HD cameras only.
Not compatible with RH-2 or RH-2 Pro

Reviews

There are no reviews yet, would you like to submit yours?

Be the first to review “DC-1 HARD WIRING KIT”

Related Products